Feeds:
Posts
Comments

Posts Tagged ‘LX-3’

This morning Panasonic released firmware v1.2 for the LX-3.
Issues addressed are:

1. Improved white balance flash mode setting when DMW-FL220 is connected.
2. Proper setting of shutter speed on iA mode and Scene mode when OIS is turned ON.
3. Proper Exif information in the JPEG picture file.

You can download the firmware directly from Panasonic here.

You can also read my hands-on review of the LX-3 here.

Read Full Post »

Panasonic LX-3 (aka Leica D-Lux 4)

Panasonic LX-3 (aka Leica D-Lux 4)

Over New Year’s Eve I had the opportunity to take a Panasonic Lumix LX-3 out and about with us for a night on the town. The particular details of the evening would be a bit verbose for our purposes here, so we’ll just cut to the chase and start talking about my experience with this camera. There were a couple of features that attracted me to the Panasonic LX-3. First, it has a an extrermely wide angle lens for a camera of its class. Most point and shoot digitals have a 38mm wide lens, some have a 28mm, but very, very few have anything wider than that. The LX-3 has a 24mm wide angle lens, with a 2.5x zoom which brings it focal length out to roughly 60mm. Second, the f/stop on the lens is quite remarkable for a camera of its type, opening up to a maximum of f/2.0 when at its widest angle. Third, the LX-3 offers a pop-up flash which is far more effective for red-eye reduction than any flash built directly into the body. I also fashioned a custom diffusion dome for this flash which can be seen further below in this review. Last, and certainly not least, the LX-3 offers the RAW file format as one of the options for image recording format. This provides distinct advantages to point & shoots that do not offer this, as white balancing, noise reduction, and sharpening can become very problematic if left to the automated image processing systems within the cameras. Read the full story below. (more…)

Read Full Post »

Follow

Get every new post delivered to your Inbox.